jaw crusher

The jaw crusher is widely used in mining, building materials, chemical industry, metallurgy and so on.

Production Description:

The jaw crusher is widely used in mining, building materials, chemical industry, metallurgy and so on. It is suitable for primary and secondary crushing all kinds of minerals and rocks with compressive strength less than 320 MPa.

Working Principle:

The belt and belt pulley are driven by a motor, and the movable jaw moves up and down via eccentric shaft. The angle between fixed jaw and movable jaw becomes smaller when the moving jaw runs down, then the materials are crushed into pieces. It becomes bigger when the movable jaw runs up. The movable jaw plate leaves the fixed jaw plate under the action of tension rod and spring , then the end products come out from the crushing cavity.

Features:

1. Simple structure, convenient maintenance;2. High crushing ratio, uniformly output granularity;3. High reliability, low investment;4. Low noise, less dust.

Technical data:

Model	Feed Opening Size (mm)	Max. Feeding Size (mm)	Adjustable Range of Output Size (mm)	Capacity (t/h)	Motor Power (kw)	Overall Dimension (mm)
PE-150×250	150×250	125	10-40	1-5	5.5	758×758×794
PE-250×400	250×400	210	20-60	5-20	15	1500×1400×900
PE-400×600	400×600	340	40-100	16-65	30	1700×1800×1600
PE-500×750	500×750	425	50-100	50-100	55	1890×1940×1870
PE-600×900	600×900	500	65-160	50-120	55-75	2395×1843×2230
PE-750×1060	750×1060	630	80-140	52-180	110	2275×2426×2840
PE-800×1060	800×1060	640	100-200	136-230	110	2500×2472×2840
PE-900×1200	900×1200	750	95-165	140-260	160	3335×3182×3430
PE-1000×1200	1000×1200	850	195-265	315-342	160	3435×3182×3430
PE-1200×1500	1200×1500	1020	150-300	400-800	280	4200×3732×4620
PEX-250×750	250×750	210	25-60	15-30	22	1400×1300×1350
PEX-250×1000	250×1000	210	25-60	16-52	30	1600×2000×1500
PEX-250×1200	250×1200	210	25-60	20-60	37	1900×2200×1500
PEX-300×1300	300×1300	260	30-90	30-70	55	1800×2300×1700

jaw crusher